vicky.james@brianhyde.co.uk 27/09/2018 15:43:36
The cutting time can be reduced by up to 50 %
Dust reduction up to 50 %
Little sparking
Low noise
Low machine load, thus longer service life of machine
Low drive output needed
Cutting is possible with weak machines too
Low development of odour
Few combustion residues from the iron such as SO2 and CO2
Lower power consumption
Fewer burrs, thus reduction of the risk of injuries
Lower material losses, very important with stainless steel
Less reworking
Narrow cutting joints that can be easily welded during fitting
Sympathetic vibrations in thin steel sheets can be almost exclude
