• Traditional spirit level with smooth sides, electrostatic powder coating and one vertical vial and one horizontal vial.
• Light metal rectangular profile with 1 vertical vial and I horizontal vial.
• Measurement accuracy: in the normal position 0.029° = 0.5 mm/m.
• The ideal all round level for household, DIY and professional use.

• Traditional spirit level with smooth sides, electrostatic powder coating and two vertical vials and one horizontal vial.
• Light metal rectangular profile.
• Measurement accuracy: in the normal position 0.029° = 0.5 mm/m.
• The ideal all round level for DIY households
and professional use.

• Traditional spirit level with smooth sides, electrostatic powder coating and one vertical vial, one horizontal vial and magnets.
• The level contains from one to six magnets on its magnetic surface, depending on its length.
• Light metal rectangular profile.
• Measurement accuracy: in the normal position 0.029° = 0.5 mm/m.

• Traditional spirit level with smooth sides, one vertical vial and one horizontal vial but with anodised, electrostatic powder coating.
• Light metal rectangular profile.
• Measurement accuracy: in the normal position 0.029° = 0.5 mm/m.

• Traditional spirit level with smooth sides, two vertical vials and one horizontal vial, but with anodised, electrostatic powder coating.
• Light metal rectangular profile.
• Measurement accuracy: in the normal position 0.029° = 0.5 mm/m.

• This spirit level can be used to check the horizontality of overhead surfaces by turning it and its horizontal vial upside down. In this so-called “transfer” position, you can then measure precisely from underneath.
• Light metal rectangular profile with milled measuring surface,
1 vertical vial and 1 horizontal vial.
• Measurement accuracy: in the normal position 0.029° =
0.5 mm/m. For overhead measurements: 0.043° = 0.75 mm/m.

• This spirit level can be used to check the horizontality of overhead surfaces by turning it and its horizontal vial upside down. In this so-called “transfer” position, you can then measure precisely from underneath.
• Light metal rectangular profile with milled measuring surface (up to 120 cm), 2 vertical vials and 1 horizontal vial.
• Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements: 0.043° = 0.75 mm/m.

• This level’s distinctive shape shows that it is a special type. It is made from pressure-cast light metal and its slim, bevelled shape makes it suitable for working in cramped spaces.
• It handles overhead measurements as easily
as it resists strong shocks.
• The T-shaped cast profile ensures a secure grip
when using work gloves.
• Milled measuring surface with one vertical vial.
• Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements: 0.043° = 0.75 mm/m.

*with belt pouch

• This level’s distinctive shape shows that it is a special type.
It is made from pressure-cast light metal and its slim, bevelled shape makes it suitable for working in cramped spaces.
• Milled measuring surface with one vertical vial
and magnet system.
• Measurement accuracy:
in the normal position 0.029° = 0.5 mm/m.
For overhead measurements: 0.043° = 0.75 mm/m.

*with belt pouch

• This pressure-cast light metal level has two milled measuring surfaces. It is robust and very practical: its two handholds make it very comfortable to use.
• The horizontal vial can be read from all four sides and both the vertical vials from three sides, whether in normal position or overhead.
• Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements:
0.029° = 0.5 mm/m.

• This pressure-cast light metal level has two milled measuring surfaces. It is robust and very practical: its two handholds make it very comfortable to use.
• The horizontal vial can be read from all four sides and both the vertical vials from three sides, whether in normal position or overhead.
• With an additional angle finding vial. The second vertical vial can be rotated so that you can determine the angle of the inclination that you are measuring.
• Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements:
0.029° = 0.5 mm/m.
• Angular measurement tolerance:
± 0.3°.

• Extra strong light metal rectangular profile with gripping ridges and a new type of removable end caps made from two materials.
• The removable end caps are also equipped with well-proven patented anti-slip stops.
• 2 milled measuring surfaces,
1 vertical vial and 1 horizontal vial.
• Measurement accuracy: in normal position 0.029° = 0.5 mm/m,
overhead measurement 0.043° = 0.75 mm/m.

• Extra strong light metal rectangular profile with gripping ridges and a new type of removable end caps made from two materials.
• The removable end caps are also equipped with well-proven patented anti-slip stops.
• 2 milled measuring surfaces, 2 vertical vials and 1 horizontal vial.
• Measurement accuracy: in normal position 0.029° = 0.5 mm/m,
overhead measurement
0.043° = 0.75 mm/m.

• Extra strong light metal rectangular profile with gripping ridges and a new type of removable end caps made from two materials but with two additional gripping holes in costly 2-component technology for a secure, firm grip.
• 2 milled measuring surfaces (up to 120 cm), 2 vertical vials and
1 horizontal vial.
• Measurement accuracy: in normal position 0.029° = 0.5 mm/m, overhead measurement 0.029° = 0.5 mm/m.

• This distinctive spirit level’s extremely strong double-chamber profile has 2 finger holes.
• The red coated end is telescopic.
• The extremely sturdy construction, in conjunction with the strong eccentric clamp, ensures a high level of accuracy when extended to any position.
• The printed length scale is ideal for setting the extended length.
• Small plates are provided on one side to even out any irregularities.
• A reliable partner when aligning higher and longer constructions.
• Light metal rectangular profile with 1 horizontal vial and 2 vertical vials.
• Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. When extended in normal position: 0.057° = 1.0 mm/m. For overhead measurements (in closed position): 0.043° = 0.75 mm/m.

• Enormous holding force: with superstrong rare earth magnets.
• Extremely strong double-chamber profile with 2 finger holes.
• The red coated end is telescopic.
• The extremely sturdy construction, in conjunction with the strong eccentric clamp, ensures a high level of accuracy when extended.
The length scale is ideal for setting the extended length.
• Secure hold under steel beams. Even when measuring overhead – components can be aligned without a problem.
• 1 horizontal vial and 2 vertical vials.
• Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. When extended in normal position: 0.057° = 1.0 mm/m. For overhead measurements (in closed position): 0.043° = 0.75 mm/m.

• The universal, small, light and versatile Handy spirit level from STABILA.
• This practical plastic spirit level is a help in many situations, for example with its 4 marking edges with 60°, 120°, 135° und 45° angles and its vials for horizontal and vertical measurement.
• Measurement accuracy: in normal position 0.057° = 1.0 mm/m.
• Small and compact, the Handy is an enormous help around the house, in workshops and on building sites.

• The universal, small, light and versatile Handy spirit level from STABILA.
• This practical plastic spirit level is a help in many situations, for example with its 4 marking edges with 60°, 120°, 135° und 45° angles and its vials for horizontal and vertical measurement.
• Measurement accuracy: in normal position 0.057° = 1.0 mm/m.
• With magnetic strip in the measuring surface.
• Small and compact, the Handy is an enormous help around the house, in workshops and on building sites.

• At last, a spirit level especially for electrical and installation work.
• The STABILA solution: Marking holes at standardised distances, with each hole located perfectly!
• Now you can measure and mark out horizontals or verticals and the distance between sockets or switches in a single operation.
• That demonstrably saves time and money. On the one hand, it saves on mental arithmetic and having to juggle with several measuring instruments – while, on the other hand, you save money on retouching the plaster.
• In accordance with DIN 49075, the distance for combinations of drill holes is 71mm.
• Light alloy rectangular profile with marking holes, end caps with anti-slip stoppers on both sides, 1 horizontal vial and 1 vertical vial.
• Measurement accuracy: in normal position 0.029 = 0.5 mm/m.

• Marking out the correct distances for the drill holes while holding the spirit level horizontally or vertically?
• No problem with STABILA’s marking spirit level. Use the sliding markers on the graduation scale to transfer and mark off the distances.
• The zero point on the scale running left and right remains easily visible on the horizontal vial.
• For longer distances, a continuous additional scale can be used to transfer the measurements.
• Shelves, pictures and anything else that you have to hang can be fitted rapidly and securely.
• Light metal rectangular profile, electrostatically coated, with 2 plastic sliding markers and 2 printed centimetre scales.
• Measurement accuracy: in normal position 0.029° = 0.5 mm/m.

• Audible inclination guide with three different audio signals.
• Two digital displays. Values can be read from above and from the side.
• Reference angle mode: Take an angular measurement, store it
and transfer it to another component.
• Extra strong light alloy ribbed rectangular profile. 2 milled measurement surfaces, 1 horizontal vial and 2 vertical vials, 1 finger grip opening. (180 cm version with 2 finger grip openings)
• Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements:
0.029° = 0.5 mm/m.
• Electronic inclination accuracy: at 0° and 90° = ± 0.05°
from 1° to 89° = ± 0.2°
• Included: a high quality carrying bag.

• Type 196-2 LED: Illuminated vials. Optimum clarity of display.
• High-performance spirit level with two built-in LED light sources.
• Intense, uniform illumination of both the horizontal and vertical vial.
• Each vial can be individually switched
on and off.
• Robust lighting system suitable for use on building sites.
• Strong light metal rectangular profile with ribs.
• 2 milled measuring surfaces.
• Finger grip opening: 1 at 60 cm,
2 at 120 cm.
• Removable end caps. • 1 illuminated horizontal and 1 illuminated vertical vial.
• Additional second vertical vial.
• Measuring accuracy: in the normal position 0.029° = 0.5 mm/m, overhead measurement 0.029° = 0.5 mm/m.

Rapid battery replacement:
battery replacement pack with 2 LED units – fast on-site battery change. Optional accessory (article number 17450). One LED unit contains two replaceable CR2016 button cells.

An invaluable aid to Bricklayers!

• Lightweight strong frame with brick guage markings.
• Easy to clean vials and frame. Fast removal of mortar.
• Special plumb vial location to put the bubble in front of your eyes no matter which course you are on.
• Wide open horizontal and plumb vials for maximum visibilty.

• Determine angles comfortably and precisely, even in difficult places, and read them easily and precisely from
the unit's analogue display. The type AWM angle measurer makes this easy.
• The large locking screw enables any position to be set and horizontals and verticals to be checked via the built-in vials.
Angle measurer AWM 37 cm:
• Light metal rectangular profile angle measurer (37 cm) with 1 horizontal vial and 1 vertical vial.
• Measurement range 180°,
readability 0.5°.
Angle measurer AWM 60 cm:
• Light metal rectangular profile angle measurer (60 cm) with 1 horizontal vial, 1 vertical vial and 2 compass points.
• The compass points can be replaced with pencils.
• Measurement range 180°,
readability 0.5°.

Cross-shaped spirit level for aligning two horizontal levels simultaneously.

Marking kit with self-adhesive steel tape for marking out.

Made from heavy metal with end hook, usable as a plumb-line.